228
USB interface model
Case 1:
Connect one printer to one client computer.
Preparation : Install the Install Assistant, the Printer Setting, and the printer driver to the
administrator’s computer, and follow the steps below.
➀ Make the printer driver setting. (Set Media in the “Favorite Setting” list.)
➁ Create the BSF file. (Driver setting.BSF)
➂ Import the driver setting file “. BSF” with the Install Assistant, and create the install
package.
➃ Create the setting file of the printer with the Printer Setting.
Distribution :
➀ Prepare the client computer and the printer.
➁ Copy the install package, and double click its icon. The printer driver for Printer-1 is
automatically installed and set.
➂ Connect Printer-1, and turn it on.
➃ Install the Printer Setting to the client computer.
➄ Make the settings to Printer-1 with the Printer Setting using the printer setting file.
To Next Page
Loading...
Need help?
General