Epson TM-C3400 - Page 25

Chapter 1 Product Overview
25
1
• The procedure to check the Missing Dot Acceptable Print Mode is different depending
on the printer driver version. See the following:
∗ Printer Driver Ver1.1.0.0 or earlier
The procedure is not displayed in the EPSON Status Monitor 3. Check the LED indica-
tion. ("Unrecoverable nozzle clogging error (Missing Dot Acceptable Print Mode)" on
page 19)
∗ Printer Driver Ver1.2.0.0 or later
The procedure is displayed in the EPSON Status Monitor 3.
• In the Missing Dot Acceptable Print Mode, EPSON Status Monitor 3 is displayed even if
[Use EPSON Status Monitor 3] is not selected in [Driver Preferences] from the [Driver
Utilities] tab.
• When 2 or more dots of unrecoverable missing dot is detected in the Missing Dot
Acceptable Print Mode, maintenance is requested and the printer needs repair.