Chapter 1 Product Overview
37
1
Paper type Fine Media
Form Roll paper
Backing paper width 30 to 112 mm
Label width 25.4 to 108 mm
Label length 25.4 to 1117.6 mm
(To use a label with a label length of 25.4 mm or less, see
descriptions for Black Mark Die-cut Label.)
Gap between labels 3 to 6 mm
Edge cutoff on left/right side 2 ± 0.5 mm
Label edge R 2 mm or less
Paper thickness 0.145 mm
Roll paper core Outside diameter: 56.8 mm
External diameter Maximum 101.6 mm
Winding direction Printing face must be facing outside.
Do not use the paper with a hole or cutout.
To Next Page
Loading...
