Chapter 3 Application Development Information
107
3
NV Graphics Print Mode
You can confirm the following information by running NV graphics print mode:
•Capacity of the NV graphics
•Used amount of the NV graphics
•Unused capacity of the NV graphics
•Number of NV graphics that are registered
• Key code, number of dots in X direction, number of dots in Y direction, number of colors to be
def
ined.
•NV graphics data
Follow the steps below to run this mode.
1
Close the roll paper cover.
2
While pressing the Feed button, turn on the printer. (Keep pressing the
Feed button until the printer starts printing.)
The printer starts printing current status of the printer.
3
After the printing has been completed, press the Feed button for more
than one second.
The printer starts printing instructions.
4
After the printing has been completed, press the Feed button.
5
Then press the Feed button for more than one second.
Turn the power off and on to return to the normal mode.
For detailed information about NV graphics, see "NV Graphics Memory" on page 24.
To Next Page
Loading...
Need help?
General