108
Receipt Enhancement Information Print Mode
You can confirm the following information by running the R/E information mode:
•Automatic top logo setting
•Automatic bottom logo setting
•Extended settings for automatic top/bottom logo
Follow the steps below to run this mode.
1
Close the roll paper cover.
2
While pressing the Feed button, turn the power on. (Keep pressing the
Feed button until the printer starts printing.)
The printer prints current status of the printer.
3
After the printing has been completed, press the Feed button for more
than one second.
The printer starts printing instructions.
4
After the printing has been completed, press the Feed button twice.
5
Then press the Feed button for more than one second.
Turn the power off and on to return to the normal mode.
To Next Page
Loading...
