Epson TM-T88V-i Technical Reference And User's Guide

Chapter 2 Setup
77
2
Setting for Connected Devices
Follow the steps below to set for devices controlled by the TM-T88V-i printer by using EPSON
TMNet WebConfig.
1
Start up a PC for setting.
2
Connect all the printers to be controlled to the network, and turn them
on.
3
Print a status sheet for each printer.
For how to print a status sheet, see "Confirming with a status sheet" on page 71.
4
Start up the web browser on the PC for setting, and enter the TM-T88V-i
printer’s IP address in the address bar as shown below.
http://xxx.xxx.xxx.xxx/PrinterConfigurationPage/
EPSON TMNet WebCon fig starts.
Setting the TM-T88V-i printer itself is not possible.
You can change the device ID for the TM-T88V-i printer.
4
5
6
7

Epson TM-T88V-i Specifications

General

Brand	Epson
Model	TM-T88V-i
Category	Printer
Language	English