18
Control Panel
LEDs
Power LED (green)
•Lights when the power supply is on.
•Goes out when the power supply is turned off.
Error LED
Lights or flashes when the printer is offline.
•Lights after the power is turned on or after a reset (offline). Automatically goes out after a
while to indicate that the printer is ready.
•Lights when the end of the roll paper is detected, and when printing has stopped (offline). If
this happens, replace the roll paper.
•Flashes when an error occurs. (For details about the flash codes, see "Error Status" on page 21.)
•Goes out during regular operation (online).
Paper LED
•Lights when there is no more roll paper or there is little remaining.
•Off when there is a sufficient amount of roll paper remaining.
•Flashes when a self-test printing standby state and macro execution standby state.
Feed button
Pressing this button once feeds the roll paper by one line. Holding this button down feeds the
roll paper continuously.
(Power) LED
Error LED
Paper LED
Feed button
To Next Page
Loading...
