C
Make sure the print head is in the home position on the right.
D
Secure the ink cartridge holder to the case with tape as shown.
E
Close the scanner unit slowly.
F
Unplug its power code and disconnect all other cables from the product.
G
Remove all paper from the rear paper feed slot.
H
Close the rear paper feed slot and the output tray.
I
Remove all paper from the paper cassette and re-insert the cassette into the product.
J
Repack the product in its box, using the protective materials that came with it.
Note:
Keep the product level during transport.
User’s Guide
Maintaining Your Product and Software
146
To Next Page
Loading...
