EasyManuals Logo

Epson WF-3620 Series User Manual

Epson WF-3620 Series
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
Troubleshooting for Faxing
Cannot send and receive fax
Make sure the phone cable is connected correctly.
& “Connecting to a Phone Line” on page 81
Run the Check Fax Connection to identify the cause of the problem.
& Setup > System Administration > Fax Settings > Check Fax Connection
Check the error code displayed for the failed fax job, and then see the following section for the solution.
& “Error Code on the Status Menu” on page 155
If the product is not connected to a phone and you want to receive faxes automatically, make sure you set Receive
Mode to Auto.
& “Setting up the receive mode” on page 94
If you connected the product to a DSL phone line, you must install a DSL filter on the line otherwise you cannot
fax. Contact your DSL provider for the necessary filter.
Transmission speed may be the cause of the problem. Lower the Fax Speed setting.
& “System Administration Settings” on page 111
If sending a fax to a specific recipient in the Contacts list often fails, set a lower fax speed for that recipient.
& “Creating a Contact” on page 102
Make sure that ECM is turned on. Color faxes cannot be sent and received when ECM is off.
& “System Administration Settings” on page 111
If a fax failed to send because the recipient machine did not respond, ask the recipient if the fax machine is
operating.
If you still cannot send the fax, the cause may be the time taken for the recipient machine to pick up the call. After
dialing, the product waits for 50 seconds for the recipient machine to respond, and if the machine does not
respond, it cancels the transmission. To solve this problem, add pauses after the fax number by entering a hyphen
(-). One hyphen causes the product to pause for three seconds.
“No dial tone detected.” error occurs
If you are connecting the product to a PBX (Private Branch Exchange) phone line or a Terminal Adapter, change the
Line Type setting to PBX.
& “Setting the line type” on page 85
If you still cannot send a fax, change the Dial Tone Detection setting to Off. However, doing so may drop the first digit
of a fax number and send the fax to the wrong number.
& Setup > System Administration > Fax Settings > Basic Settings > Dial Tone Detection
User’s Guide
Troubleshooting for Faxing
191

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WF-3620 Series and is the answer not in the manual?

Epson WF-3620 Series Specifications

General IconGeneral
Print TechnologyInkjet
FunctionsPrint, Copy, Scan, Fax
Print Resolution4800 x 2400 dpi
Scan TypeFlatbed, ADF
Scan Resolution1200 x 2400 dpi
Mobile PrintingEpson Connect, Apple AirPrint, Google Cloud Print
Duplex PrintingYes
Print Speed (Black)19 ISO ppm
Print Speed (Color)10 ppm (ISO)
Copy Speed (Black)17 ISO cpm
Copy Speed (Color)9 cpm (ISO)
Copy ResolutionUp to 600 x 1200 dpi
Fax Transmission Speed3 seconds per page
Paper Capacity250 sheets
ConnectivityUSB, Ethernet, Wi-Fi
Display2.7" touchscreen
Ink Cartridges4 individual ink cartridges
Automatic Document Feeder35 sheets

Related product manuals