Remote Receive:
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Start Code
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax:
Rejection Fax
Select options to reject receiving junk faxes.
❏ Rejection Number List: If the other party's phone number is in the rejection number list, set
whether to reject the incoming faxes.
❏ Fax Header Blank: If the other party's phone number is blocked, set whether to reject
receiving the faxes.
❏ Unregistered Contacts: If the other party's phone number is not in the contacts, set whether
to reject receiving the faxes.
Edit Blocked Number list
You can register up to 30 fax numbers to reject the faxes and calls. Enter up to 20 characters
using 0-9, *, #, or space.
Related Information
& “Making the Printer Ready to Send and Receive Faxes” on page 345
& “Making Settings for a PBX Phone System” on page 347
& “Receiving Incoming Faxes” on page 111
& “Making Settings for Blocking Junk Faxes” on page 350
Send Settings
You can nd the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Send Settings
Note:
On the Web Cong screen, you can nd the menu below.
Fax tab > Send Settings
Wait Time for Next Original:
Set the time to wait for the next original.
e
printer starts sending the fax
aer
the time has passed.
Fax Preview Display Time:
You can preview the scanned document for a set time before sending it. e printer stars sending the
fax aer the time has passed.
Product Information
>
Settings Menu List
>
General Settings
280
To Next Page
Loading...
Need help?
General
