273
• Select the icon to display the sent fax history.
Note: To delete entered recipients, select the Enter Recipient field, select the recipient you want to
delete, and select Remove.
5. If you need to change any fax settings, select Fax Settings and select your settings.
6. If you want to preview your fax in black-and-white on the LCD, press the Preview icon. (If the
preview looks incorrect, select Cancel, reposition the document or change the fax settings, and
repeat this step.)
Note: If Fax Preview Display Time is enabled and you do not touch the preview screen for 20
seconds, your product sends the fax automatically. You cannot preview images when the Direct
Send setting is turned on.
7. If you want to save your fax settings for later use, select Presets and add a new entry.
8. Select the Send icon.
Note: To cancel faxing, select Stop or Cancel, then select Cancel Fax to Send. You can also
cancel the job or check the job status from the Job/Status screen.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Note: Your product does not save sent color faxes to its memory. If the Save Failure Data option is
enabled, faxes that failed to be sent are stored to the product's memory and you can resend them from
the Job/Status screen.
Parent topic: Sending Faxes from the Product Control Panel
Related references
Fax Sending Options
Related tasks
Using Presets
Selecting the Line Type
Checking Fax Status
To Next Page
Loading...
Need help?
General
