Epson WF-C21000 User Manual

67
Error code and message Solution
E-11
Setup is incomplete. Confirm default
gateway setup. Connection using the
EpsonNet Setup is available. Contact your
network administrator for assistance.
If you set your product's TCP/IP Setup setting to Manual,
check that the default gateway address listed on the
network connection report is correct. Also turn on the
device that is set as the default gateway.
E-12
Confirm the following:
-Entered security key/password is correct
-Index of the security key/password is set to
the first number
-IP address, subnet mask, or default
gateway setup is correct
Contact your network administrator for
assistance.
Make sure other devices on the network are turned on and
do the following:
• Make sure the IP address, subnet mask, and default
gateway addresses are correct, if you are entering them
manually.
• Confirm that the subnet mask and default gateway
addresses for other devices are the same.
• Make sure the IP address does not conflict with other
devices.
If you still cannot connect to your product, do the
following:
• Turn off your router or access point, wait about 10
seconds, and turn it on again.
• Download and install your product software again to
reset your network settings.
• If your router or access point uses WEP security with
several registered passwords, make sure that the first
registered password is set on your product.

Epson WF-C21000 Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Duplex Printing	Yes
Max Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Print Speed Black	100 ppm
Print Speed Color	100 ppm
Scan Type	Flatbed
Copy Speed	Up to 100 cpm
Fax Capability	Yes
Paper Capacity	5, 350 sheets
Display	color touchscreen
Functions	Print, Copy, Scan
Fax Speed	33.6 Kbps (optional)
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing	Apple AirPrint, Google Cloud Print
Ink Cartridge Configuration	4 individual ink cartridges