EasyManuals Logo

Epson WorkForce WF-2910 Series User Manual

Epson WorkForce WF-2910 Series
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
Related Information
& “Setting a Static IP Address for the Printer” on page 133
E-12
Solutions:
Check the following.
Other devices on the network are turned on.
e network addresses (IP address, subnet mask, and default gateway) are correct if you are entering them
manually.
e network addresses for other devices (subnet mask and default gateway) are the same.
e IP address does not conict with other devices.
If still does not connect your printer and network devices aer conrming the above, try the following.
Turn o the wireless router. Wait for about 10 seconds, and then turn it on.
Make network settings again using the installer. You can run it from the following website.
https://epson.sn > Setup
You can register several passwords on a wireless router that uses WEP security type. If several passwords are
registered, check if the
rst
registered password is set on the printer.
Related Information
& “Setting a Static IP Address for the Printer” on page 133
E-13
Solutions:
Check the following.
Network devices such as a wireless router, hub, and router are turned on.
e TCP/IP Setup for network devices has not been set up manually. (If the printer’s TCP/IP Setup is set
automatically while the TCP/IP Setup for other network devices is performed manually, the printer’s network
may dier from the network for other devices.)
If it still does not work aer checking the above, try the following.
Turn
o
the wireless router. Wait for about 10 seconds, and then turn it on.
Make network settings on the computer that is on the same network as the printer using the installer. You can
run it from the following website.
https://epson.sn > Setup
You can register several passwords on a wireless router that uses the WEP security type. If several passwords are
registered, check if the
rst
registered password is set on the printer.
Related Information
& “Making Settings for Connecting to the Computer” on page 118
In These Situations
>
Re-Setting the Network Connection
>
Messages and Solutions on the Network Connection
126

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce WF-2910 Series and is the answer not in the manual?

Epson WorkForce WF-2910 Series Specifications

General IconGeneral
Print TechnologyInkjet
FunctionsPrint, copy, scan, fax
Display1.44" color LCD
ConnectivityUSB, Wi-Fi
Paper Handling100-sheet input tray
Compatible InkEpson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)10 pages per minute
Print Speed (Color)5 ppm (ISO)
Mobile PrintingApple AirPrint
Paper SizesA4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges4 individual cartridges
Print Resolution5760 x 1440 optimized dpi

Related product manuals