Epson WorkForce WF-2910 Series User Manual

e printer can be connected by Wi-Fi and Wi-Fi Direct (Simple AP) connection simultaneously. However, if you
start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected by Wi-Fi, the
Wi-Fi is temporarily disconnected.
Connecting to Devices using Wi-Fi Direct
is method allows you to connect the printer directly to smart devices without a wireless router.
Note:
For iOS or Android users, it is convenient to set up from Epson Smart Panel.
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1.
Select Wi-Fi Setup on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2.
Select Wi-Fi Direct.
3.
Check the message, and then press the OK button to proceed.
4.
Check the message, and then press the OK button to proceed.
5.
Press the
l .
6.
Select Other OS Devices.
7.
Scroll the screen with the
d button, and check the connection information for Wi-Fi Direct.
In These Situations > Connecting a Smart Device and Printer Directly (Wi-Fi Direct) > Connecting to Devices usin …
128

Epson WorkForce WF-2910 Series Specifications

General

Print Technology	Inkjet
Functions	Print, copy, scan, fax
Display	1.44" color LCD
Connectivity	USB, Wi-Fi
Paper Handling	100-sheet input tray
Compatible Ink	Epson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)	10 pages per minute
Print Speed (Color)	5 ppm (ISO)
Mobile Printing	Apple AirPrint
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges	4 individual cartridges
Print Resolution	5760 x 1440 optimized dpi