Epson WorkForce WF-2910 Series User Manual

Loading Pre-punched Paper
Load paper at the center of the rear paper feeder with the printable side facing up.
❏ Load a single sheet of
dened
size plain paper with binding holes at the
le
or right.
❏ Adjust the print position of your le to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
Related Information
& “Available Paper and Capacities” on page 203
& “Unavailable Paper Types” on page 205
Loading Long Papers
When loading paper longer than legal size, store the paper support, and then atten the leading edge of the paper.
Select User-Dened as the paper size setting.
❏ Make sure the end of the paper is cut perpendicularly. A diagonal cut may cause paper feed problems.
❏ Long paper cannot be held in the output tray. Prepare a box and so on to make sure that paper does not fall on
the oor.
❏ Do not touch paper that is being fed or ejected. It could injure your hand or cause print quality to decline.
Related Information
& “Available Paper and Capacities” on page 203
& “Unavailable Paper Types” on page 205
Loading Paper > Loading Various Paper > Loading Long Papers
31

Epson WorkForce WF-2910 Series Specifications

General

Print Technology	Inkjet
Functions	Print, copy, scan, fax
Display	1.44" color LCD
Connectivity	USB, Wi-Fi
Paper Handling	100-sheet input tray
Compatible Ink	Epson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)	10 pages per minute
Print Speed (Color)	5 ppm (ISO)
Mobile Printing	Apple AirPrint
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges	4 individual cartridges
Print Resolution	5760 x 1440 optimized dpi