Before Using Fax Features
Check the following before you start using the fax features.
❏
e
printer and the phone line, and (if it is being used) the phone machine are connected correctly
❏ Fax basic settings (Fax Setting Wizard) is complete
❏ Other necessary Fax Settings are complete
See "Related Information" below to make settings.
Related Information
& “Connecting the Printer to a Phone Line” on page 70
& “Making the Printer Ready to Send and Receive Faxes” on page 73
& “Basic Settings Menu” on page 219
& “Making Settings for the Printer's Fax Features According to Use” on page 75
& “Fax Settings” on page 218
& “Making Contacts Available” on page 78
& “User Default Settings Menu” on page 224
& “Report Settings Menu” on page 223
Connecting the Printer to a Phone Line
Compatible Telephone Lines
You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and
PBX (Private Branch Exchange) telephone systems.
You may not be able to use the printer with the following phone lines or systems.
❏ VoIP phone line such as DSL or ber-optic digital service
❏ Digital phone line (ISDN)
❏ Some PBX telephone systems
❏ When adapters such as terminal adapters, VoIP adapters, splitters, or DSL router are connected between the
telephone wall jack and the printer
Related Information
& “Connecting the Printer to a Phone Line” on page 70
Connecting the Printer to a Phone Line
Connect the printer to a telephone wall jack using an RJ-11 (6P2C) phone cable. When connecting a telephone to
the printer, use a second RJ-11 (6P2C) phone cable.
Depending on the area, a phone cable may be included with the printer. If it is included, use that cable.
You may need to connect the phone cable to an adapter provided for your country or region.
Faxing
>
Before Using Fax Features
>
Connecting the Printer to a Phone Line
70
To Next Page
Loading...
Need help?
General
