Epson WorkForce WF-2910 Series User Manual

The margin setting in the application software is not within the print area.
Solutions
Adjust the margin setting in the application so that it falls within the printable area.
& “Printable Area” on page 226
Printed Characters Are Incorrect or Garbled
e following causes can be considered.
The USB cable is not connected correctly.
Solutions
Connect the USB cable securely to the printer and the computer.
There is a job waiting to be printed.
Solutions
Cancel any paused print jobs.
The computer has been manually put into the Hibernate mode or the Sleep mode while
printing.
Solutions
Do not put the computer manually into the Hibernate mode or the Sleep mode while printing. Pages of
garbled text may be printed next time you start the computer.
You are using the printer driver for a dierent printer.
Solutions
Make sure that the printer driver you are using is for this printer. Check the printer name on the top of
the printer driver window.
The Printed Image Is Inverted
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Print Quality is Poor
162

Epson WorkForce WF-2910 Series Specifications

General

Print Technology	Inkjet
Functions	Print, copy, scan, fax
Display	1.44" color LCD
Connectivity	USB, Wi-Fi
Paper Handling	100-sheet input tray
Compatible Ink	Epson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)	10 pages per minute
Print Speed (Color)	5 ppm (ISO)
Mobile Printing	Apple AirPrint
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges	4 individual cartridges
Print Resolution	5760 x 1440 optimized dpi