Epson WorkForce WF-2910 Series User Manual

Straight Lines Appear when Scanning from ADF
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
& “Cleaning the ADF” on page 106
Oset Appears in the Background of Scanned Images
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
When scanning from the scanner glass, place black paper or a desk pad over the original.
Cannot Scan the Correct Area on the Scanner Glass
The originals are not placed correctly.
Solutions
❏ Make sure the original is placed correctly against the alignment marks.
❏ If the edge of the scanned image is missing, move the original slightly away from the edge of the
scanner glass.
& “Placing Originals on the Scanner Glass” on page 35
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Scanned Image Problems
171

Epson WorkForce WF-2910 Series Specifications

General

Print Technology	Inkjet
Functions	Print, copy, scan, fax
Display	1.44" color LCD
Connectivity	USB, Wi-Fi
Paper Handling	100-sheet input tray
Compatible Ink	Epson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)	10 pages per minute
Print Speed (Color)	5 ppm (ISO)
Mobile Printing	Apple AirPrint
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges	4 individual cartridges
Print Resolution	5760 x 1440 optimized dpi