Epson WorkForce WF-2910 Series User Manual

❏ Aer bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least three hours before using it.
❏ Do not open the ink cartridge package until you are ready to install it in the printer. e cartridge is vacuum
packed to maintain its reliability. If you leave a cartridge unpacked for a long time before using it, normal
printing may not be possible.
Handling precautions for replacing ink cartridges
❏ Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package.
❏ Do not shake cartridges aer opening the package, as they may leak.
❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or
you may not be able to print. Do not remove or tear the label on the cartridge; this can cause leakage.
❏ Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become
unusable.
Solving Problems > It is Time to Replace the Ink Cartridges > Ink Cartridge Handling Precautions
183

Epson WorkForce WF-2910 Series Specifications

General

Print Technology	Inkjet
Functions	Print, copy, scan, fax
Display	1.44" color LCD
Connectivity	USB, Wi-Fi
Paper Handling	100-sheet input tray
Compatible Ink	Epson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)	10 pages per minute
Print Speed (Color)	5 ppm (ISO)
Mobile Printing	Apple AirPrint
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges	4 individual cartridges
Print Resolution	5760 x 1440 optimized dpi