Epson XP-830 Series

1. Place the originals.
2. Select Fax on the control panel.
3.
Specify the recipient.
4. Press Advanced Options, and then select Send Fax Later.
5. Press On, enter the time to send the fax, and then press Done.
6. Scroll the screen by pressing
d , and then make settings such as the resolution and the sending method as
necessary.
7. Press the
x button.
e originals are scanned, saved, and then sent at the specied time.
Note:
Until the fax is sent at the specied time, you cannot send other faxes. To cancel the fax, press the
y button on the fax
mode top screen.
Related Information
& “Placing Originals on the Scanner Glass” on page 38
& “Placing Originals on the ADF” on page 36
& “Sending Faxes Using the Control Panel” on page 109
Sending Faxes to Multiple Recipients (Broadcast Fax)
A monochrome fax can be sent to up to 30 recipients at a time. You can specify the recipients by entering fax
numbers manually, using speed dial or group dial entries, or by using all methods.
1. Place the originals.
2.
Select Fax on the control panel.
3. Press Advanced Options, and then select Broadcast Fax.
4. Select Add New as the Contact List setting.
5.
Do one of the following to add recipients.
❏ Press Enter Fax Number, enter a fax number using the soware keyboard, and then press Done.
❏ Press Select from Contacts, select recipients from the contact list displayed, and then press Done.
6. Add the necessary recipients by repeating step 4 and 5, and then press Done.
7.
Scroll the screen by pressing
d , and then make settings such as the resolution as necessary.
8. Press the
x button.
User's Guide
Faxing
111