Menu Options for Sending a Fax
Send Settings
❏ Enter Fax Number
Manually enter a fax number.
❏ Contacts
Select a recipient from the contacts list. You can also add or edit a contact.
❏ Redial
Select to redial the last fax number dialed.
❏ Color
Sends a fax in color.
❏ B&W
Sends a fax in monochrome.
❏ Resolution
Select the resolution of the outgoing fax. Select Photo for originals that contain both text and photo
images.
❏ Contrast
Sets the density of the outgoing fax. e Auto option automatically adjusts the contrast for your
original.
❏ 2-Sided Faxing
Scans both sides of originals placed in the ADF and sends a monochrome fax.
❏ Direct Send
Sends monochrome faxes to a single recipient as soon as the connection is made without saving the
scanned image to memory. When this option is not used, the printer starts sending
aer
saving an
entire scanned image to the memory. erefore, sending a large volume document may generate a
memory full error. By using this option, you can avoid this error, but sending faxes takes longer. You
cannot use this option when using the 2-Sided Faxing option or when sending a fax to multiple
recipients.
❏ Send Preview
When sending a monochrome fax, the scanned image is displayed on the LCD screen.
is
allows
you to check the image before sending the fax. You cannot use this option when using the Direct
Send option.
❏ Clear All Settings
Restores the settings congured in Setup > Fax Settings > Send Settings.
Send Fax Later
Sends the fax at the time you specify. You can only send monochrome faxes when using this option.
Broadcast Fax
User's Guide
Faxing
119
To Next Page
Loading...
Need help?
General
