Epson XP-830 Series

Copying
Copying Basics
1. Load paper in the printer.
c
Important:
❏ When loading in the paper cassette, make the paper settings on the control panel.
❏ When loading in the rear paper feed slot, do not load paper now. When you select the rear paper feed slot as
the paper source setting, and then press the
x button, the printer will prompt you to load paper. Follow the
instructions to load the paper.
2. Place the originals.
If you want to copy multiple originals or make 2-sided copies, place all of the originals on the ADF.
3.
Select Copy on the control panel.
4. Set the number of copies using – or +.
5. Select color copy or monochrome copy.
6.
Check the settings such as the paper size and the paper type and change settings if necessary.
Note:
❏ If you want to copy by reducing or enlarging the size of a document by a specic percentage, select Custom Size as
the Reduce/Enlarge setting, and then enter a percentage on the screen displayed.
❏ When using ADF, you can only copy on A4-size plain paper at the same magnication.
If you change any of the following settings, you cannot copy using the ADF.
❏ Reduce/Enlarge: Actual Size, or Auto Fit Page for A4, 2-up Copy
❏ Paper size: A4
❏ Paper type: plain papers
❏ If you place originals that are larger than A4 size on the ADF, they are trimmed to A4 size.
7. Press the x button. When printing from the rear paper feed slot, press the x button, and then load paper
when you are instructed to do so.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 25
& “Loading Paper in the Paper Cassette 2” on page 29
& “Loading Paper in the Rear Paper Feed Slot” on page 33
& “Placing Originals on the Scanner Glass” on page 38
& “Placing Originals on the ADF” on page 36
&
“Menu Options for Copy Mode” on page 86
User's Guide
Copying
85