Epson XP-830 Series

5. Click Preview.
Note:
❏ Depending on the photos and the scanning conditions, the scan results may not be as intended. Clear
umbnail
,
and only place one photo.
❏ When placing multiple photos, place them at least 20 mm (0.8 inch) apart. Also, the edge area of the scanner glass is
not scanned.
6. Adjust the quality or brightness of the image as necessary.
Note:
Depending on the originals, the scan results may not be as intended.
7. Click Scan.
8. In the File Save Settings screen, make appropriate settings such as the le name, location, and image format
type, and then click OK.
Note:
When Show this dialog box before next scan is cleared, the File Save Settings screen is not displayed and scanning
starts immediately. To display the File Save Settings screen, click the
(File Save Settings) icon to the right of Scan
before starting to scan.
Related Information
& “Placing Originals on the Scanner Glass” on page 38
& “Placing Originals on the ADF” on page 36
& “EPSON Scan (Scanner Driver)” on page 158
Scanning Using Advanced Features
Scanning at Specied Sizes (Oce Mode)
You can scan originals at the specied size without previewing the image. By using the ADF, you can scan many
documents rapidly. Select Oce Mode from the Mode list in EPSON Scan.
User's Guide
Scanning
97