EasyManua.ls Logo

Epson XP-830 Series

Epson XP-830 Series
205 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reduces large received documents to t on the paper in the paper source. Reducing may not always be
possible depending on the received data. If this is turned
o,
large documents are printed at their
original size on multiple sheets, or a blank second page may be ejected.
Collation Stack
Prints received documents from the last page (print in descending order) so that the printed documents
are stacked in the correct page order. When the printer is running low on memory, this feature may not
be available.
Print Suspend Time
Saves documents received during the specied time period in the printer's memory without printing
them. At the time specied to restart printing, the saved documents are automatically printed. is
feature can be used for noise prevention at night or to prevent condential documents from being
disclosed while you are away. Before using this feature, make sure there is enough free memory.
Menu Options for Report Settings
Select the menu on the control panel as described below.
Setup > Fax Settings > Report Settings
Last Transmission Report
Prints a report automatically aer a fax is sent. Select On Error to print a report only when an error
occurs.
Attach Image to Report
Prints a Last Transmission report with an image of the
rst
page of the sent document. Select
On(Large Image) to print the upper part of the page without reducing. Select On(Small Image) to
print the entire page reducing it to t onto the report.
Fax Log Auto Print
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are completed.
Select On(Time) to print the log at a
specied
time. However, if the number of fax jobs exceeds 30, the
log is printed before the specied time.
Report Format
Select a format for fax reports other than Protocol Trace. Select Detail to print with error codes.
Menu Options for Communication
Select the menu on the control panel as described below.
Setup > Fax Settings > Communication
Header
Enter your sender name and fax number. ese appear as a header on outgoing faxes. You can enter up
to 40 characters for your name, and up to 20 digits for your fax number.
Dial Mode
User's Guide
Faxing
122

Table of Contents

Related product manuals