6. Close the document cover, and then close the ADF cover.
7. Open the ADF input tray.
8. Remove the jammed paper.
9. Close the ADF input tray.
Paper Does Not Feed Correctly
Check the following points, and then take the appropriate actions to solve the problem.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
Related Information
&
“Environmental
Specications
” on page 199
& “Paper Handling Precautions” on page 22
& “Available Paper and Capacities” on page 23
& “List of Paper Types” on page 25
Paper Jams
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
User's Guide
Solving Problems
173
To Next Page
Loading...
