Related Information
& “Loading a CD/DVD” on page 44
Original Does Not Feed in the ADF
❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load originals above the line indicated by the triangle symbol on the edge guide.
❏ Check that the ADF icon appears on the control panel. If it does not appear, place the originals again.
Related Information
& “Available Originals for the ADF” on page 36
& “Placing Originals on the ADF” on page 36
& “Cleaning the ADF” on page 139
Power and Control Panel Problems
Power Does Not Turn On
❏ Hold down the
P
button for a little longer.
❏ Make sure the power cord is securely plugged in.
Lights Came On and then Went Out
e
printer's voltage may not match the outlet rating. Turn
o
the printer and unplug it immediately.
en
check
the label on the printer.
!
Caution:
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.
Power Does Not Turn O
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
LCD Screen Gets Dark
e
printer is in sleep mode. Press anywhere on the LCD screen to return it to its former state.
User's Guide
Solving Problems
175
To Next Page
Loading...
