Follow the instructions supplied with the stickers to load one sheet of Photo Stickers. Do not load the
loading support sheets into this product.
7. Slide the right edge guide to the edge of the paper.
8. Insert paper cassette 1. Line up the alignment marks on the printer and the tray.
9. Check the paper size and paper type settings displayed on the control panel. To use the settings, press
Conrm
. To change the settings, press Change, and then go to the next step.
Note:
e paper setting screen is not displayed if you have disabled Paper Conguration in the following menus.
Setup > Printer Setup > Paper Source Setting > Paper Conguration
User's Guide
Loading Paper
28
To Next Page
Loading...
