Warranty Repair and Annual Servicing:
Please contact Escea if you require warranty work. Warranty repair work must be carried
out by a recognised gas fire technician. It is recommended that recognised Escea Gas Fire
Technicians are also used to carry out annual servicing requirements (particularly during the
warranty period). For contact details of recognised Escea Gas Fire Technicians in your area, or
for replacement parts, please contact the retailer from whom the appliance was purchased our
visit our website.
General Installation Information:
This appliance must be installed according to these instructions and in compliance with all
relevant building, gas fitting, electrical and other statutory regulations (eg. AS/NZS 5601.1).
Any shortcomings in the appliance and flue installation will be the responsibility of the installer,
and Escea will not be accountable for any such failings or their consequences.
Once this appliance is installed it cannot be removed without disturbing the wall lining.
This DX Series fireplaces has been dispatched from the factory set as a single sided version.
This can be converted into a double sided appliance by using the Double Sided Conversion Kit
available from your Escea distributor. Conversion details are shown in Section E.
An electrician is required to install a 3pin power socket – Section C.
To Next Page
Loading...
