E Installing the Appliance 29
E1 Double Sided Conversion 29
E2 Installing the Appliance 30
E3 Connecting the Flue 30
E4 Connecting the Ducting 30
E5 Connecting the Network Cable 30
E6 Connecting the Powerflue and Duct Fan Cables 31
E7 Removing (and Replacing) the Glass 31
E8 Remove the Fuelbed Tray & Burners 32
E9 Gas Type Conversion 32
E10 Checking the Gas Operating Pressure 34
E11 Operating the Appliance 37
E12 Auxillary On/O button 37
E13 Home Automation Setup 37
F Finishing the Installation 39
F1 Crystalight, Coal, or Driftwood Fuel Bed Installation 39
F2 Woodland Selection Fuel Bed 39
F3 Replace the Glass 40
F4 Wall Lining 40
F5 Fitting the Fascia Panels 41
F6 Locating Wall Mount Cradle for Wireless Control 42
F7 Operating the Appliance 42
F8 Normal Operating Sounds and Smells 44
G Installation Checklist 45
S Service Manual 46
S1 Annual service procedure 46
S2 Error Codes 47
S3 Cleaning the Fuel bed, Fascia, and Glass 49
S4 Checking Operating Pressure 50
S5 Replacing a Remote Control 51
S6 Replacing the Burners 52
S7 Accessing the Control Tray 53
S8 Removing the Circuit Board 53
S9 Servicing the Horizontal/Universal Vertical Powerflue 55
S10 Wiring Diagram 56
To Next Page
Loading...
