IP Server 900 Programming Manual Function 6: Recording of prompts
I.8
Function 6414: SIP trunk recording settings
1. Choose SIP trunks to program
You can select from the first set of 12 CO lines on the first carrier. Use the scroll keys to view the
next 12 CO lines on the first carrier.
Note: A 48-Key Feature Phone will display the first set of 24 CO lines on the first carrier.
Select the CO lines to be programmed alike and press # to confirm. The LEDs on the keys for the
selected lines will glow green; then, after a CO line is programmed, its key’s LED will glow amber.
Programming of the first CO line should default forward for the remaining CO lines selected. After
the selected CO line are programmed, their keys’ LEDs will glow amber.
The display will be:
CC 1 SIP DAY
56-70 >
Note: Only carrier card 01 supports SIP trunk programming.
2. Select to enable call recording
The call recording service for this line is authorized as displayed. Press a scroll key to change — or,
to confirm the current setting, press #.
Default: NO.
CO LINE
RECORDING: NO >
To Next Page
Loading...
