IP Server 900 Programming Manual Function 6: Recording of prompts
I.9
Function 642: Extension and department recordings
1. Select the extension or department to be recorded
Enter the extension or department number to be programmed:
CALL RECORDING
EXT/DEPT: 100
2. Select to enable call recording
The call recording service for this line is authorized as displayed. Press a scroll key to change — or, to
confirm the current setting, press #.
Default: NO.
X100 BOB
RECORD: NO >
3. Select to enable privacy-on-demand
Note: This step will appear only if a valid extension was entered in step 1 and the ESI phone at the
extension has a three-line display.
Privacy-on-demand allows the defined user to decide whether a call will be recorded and saved. While
on a call, a user with this option enabled may press the PVY (privacy) soft key, which will immediately
stop the recording of the call and delete any recording that may have been started.
Privacy-on-demand can be assigned only to individual extensions, not departments. Therefore, if you
want to enable privacy-on-demand for any extensions in a department, you must enter each extension
individually and then enable privacy-on-demand for that extension.
X100 BOB
PRIVACY: NO >
Default: NO.
To Next Page
Loading...
