IP Server 900 Programming Manual Function 6: Recording of prompts
I.10
Function 643: Call recording parameters
1. Set the minimum call timer
The minimum length for a call recording can be between two and 10 seconds, in increments of one
second, and applies equally to all channels. If the call length is less than this minimum setting, the call’s
recording will be deleted automatically upon termination of the call.
Default: 10 seconds. Range: 2–10 seconds.
MIN RECORD TIME
10 SECONDS
2. Set the maximum call timer
The maximum length for a call recording can be between one minute and 120 minutes, in increments
of one minute, and applies equally to all channels. If a call’s length reaches the maximum, the call’s
recording will be terminated immediately and a new recording will begin (the new recording will be
indicated in the SMDR record by the word CONT following the digits dial field).
Default: 60 minutes. Range: 1–120 minutes.
MAX RECORD TIME
60 MINUTES
To Next Page
Loading...
