ESI 900 - Function 2142: SIP account programming

IP Server 900 Programming Manual Function 2: CO line programming
E.18
13. This line is programmed to be answered as displayed. To select a specific station, mailbox, or
branch ID or to specify the internal ESI Fax over e-mail server as the destination which should
answer this, press a scroll key and enter the new value, and press # to confirm. (If the current value
is acceptable, just press # to confirm.)
Default: ID 1.
RING 1
ID: 1
14. Either press 1 to save your changes to the IP/ASC Carrier Card or press 2 to exit without restarting
the IP/ASC Carrier Card.
RESTART SIP ITSP
1=YES 2=NO
Note: Changes made to IP/ASC Carrier Card programming require that the IP/ASC Carrier Card be
restarted in order for the changes to be uploaded to the IP/ASC Carrier Card. Press 1 to
restart the SIP ITSP now or press 2 to exit and return to the main menu.
Warning: Restarting the SIP ITSP will cause any calls in progress to be disconnected.
Function 2142: SIP account programming
The procedure in Function 2142 varies after step 2, depending on your selection in that step. Therefore,
we have separated the first two (common) steps from the subsequent steps, as you see here.
Common steps 1–2: Selecting SIP provider and ITSP
1. Enter the name for the SIP provider number (or, to select a previously entered SIP provider, use
the scroll keys, and press # to confirm.
For this example, we’ll be using “SIP Provider 1,” named Broadvox, with the IP/ASC Carrier
Card installed in position number 1.
Range: Up to 10 characters in length.
SIP PROVIDER #1
BROADVOX >
2. The ITSP is currently programmed as shown on the display. To select a new value, select a new
value, and press # to confirm (or, to confirm the existing value, just press #).
Choices: Broadvox-ND, Broadvox-NS, nTelos-BD, ClearFly-SS, Broadvox-FS, Broadvox-FD,
Voxitas-FS, Voxitas-FD, Cbeyond-BD, Comporium-BD, Genband-GD, Cox Cable-BD.
Default: Broadvox-ND.
ITSP SELECTION
BROADVOX-ND >
(Continued)