EasyManua.ls Logo

Espressif ESP32-S2 - Page 1144

Espressif ESP32-S2
1695 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2. API Reference
CONFIG_ESP32_WIFI_IRAM_OPT
WiFi IRAM speed optimization
Found in: Component config > Wi-Fi
Select this option to place frequently called Wi-Fi library functions in IRAM. When this option is dis-
abled, more than 10Kbytes of IRAM memory will be saved but Wi-Fi throughput will be reduced.
Default value:
Yes (enabled)
CONFIG_ESP32_WIFI_RX_IRAM_OPT
WiFi RX IRAM speed optimization
Found in: Component config > Wi-Fi
Select this option to place frequently called Wi-Fi library RX functions in IRAM. When this option is
disabled, more than 17Kbytes of IRAM memory will be saved but Wi-Fi performance will be reduced.
Default value:
Yes (enabled)
CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE
Enable WPA3-Personal
Found in: Component config > Wi-Fi
Select this option to allow the device to establish a WPA3-Personal connection with eligible APs.
PMF (Protected Management Frames) is a prerequisite feature for a WPA3 connection, it needs to be
explicitly configured before attempting connection. Please refer to the Wi-Fi Driver API Guide for
details.
Default value:
Yes (enabled)
CONFIG_ESP_WIFI_SLP_IRAM_OPT
WiFi SLP IRAM speed optimization
Found in: Component config > Wi-Fi
Select this option to place called Wi-Fi library TBTT process and receive beacon functions
in IRAM. Some functions can be put in IRAM either by ESP32_WIFI_IRAM_OPT and
ESP32_WIFI_RX_IRAM_OPT, or this one. If already enabled ESP32_WIFI_IRAM_OPT,
the other 7.3KB IRAM memory would be taken by this option. If already enabled
ESP32_WIFI_RX_IRAM_OPT, the other 1.3KB IRAM memory would be taken by this option.
If neither of them are enabled, the other 7.4KB IRAM memory would be taken by this option. Wi-Fi
power-save mode average current would be reduced if this option is enabled.
CONFIG_ESP_WIFI_SLP_DEFAULT_MIN_ACTIVE_TIME
Minimum active time
Found in: Component config > Wi-Fi > CONFIG_ESP_WIFI_SLP_IRAM_OPT
The minimum timeout for waiting to receive data, unit: milliseconds.
Range:
from 8 to 60 if CONFIG_ESP_WIFI_SLP_IRAM_OPT
Default value:
50 if CONFIG_ESP_WIFI_SLP_IRAM_OPT
Espressif Systems 1133
Submit Document Feedback
Release v4.4

Table of Contents