Chapter 2. API Reference
Default value:
• Yes (enabled)
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE
Support Elliptic Curve based ciphersuites
Found in: Component config > mbedTLS > TLS Key Exchange Methods
Enable to show Elliptic Curve based ciphersuite mode options.
Disabling all Elliptic Curve ciphersuites saves code size and can give slightly faster TLS handshakes,
provided the server supports RSA-only ciphersuite modes.
Default value:
• Yes (enabled)
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
Enable ECDHE-RSA based ciphersuite modes
Found in: Component config > mbedTLS > TLS Key Exchange Methods > CON-
FIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
Default value:
• Yes (enabled)
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
Enable ECDHE-ECDSA based ciphersuite modes
Found in: Component config > mbedTLS > TLS Key Exchange Methods > CON-
FIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
Default value:
• Yes (enabled)
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
Enable ECDH-ECDSA based ciphersuite modes
Found in: Component config > mbedTLS > TLS Key Exchange Methods > CON-
FIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
Default value:
• Yes (enabled)
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA
Enable ECDH-RSA based ciphersuite modes
Found in: Component config > mbedTLS > TLS Key Exchange Methods > CON-
FIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE
Enable to support ciphersuites with prefix TLS-ECDHE-RSA-WITH-
Default value:
• Yes (enabled)
Espressif Systems 1193
Submit Document Feedback
Release v4.4
To Next Page
Loading...