Espressif ESP32-S2 - Page 1212

Chapter 2. API Reference
• Yes (enabled) if (CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN || CON-
FIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY) && CONFIG_MBEDTLS_ECP_C
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED
Enable SECP192K1 curve
Found in: Component config > mbedTLS > CONFIG_MBEDTLS_ECP_C
Enable support for SECP192K1 Elliptic Curve.
Default value:
• Yes (enabled) if (CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN || CON-
FIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY) && CONFIG_MBEDTLS_ECP_C
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED
Enable SECP224K1 curve
Found in: Component config > mbedTLS > CONFIG_MBEDTLS_ECP_C
Enable support for SECP224K1 Elliptic Curve.
Default value:
• Yes (enabled) if (CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN || CON-
FIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY) && CONFIG_MBEDTLS_ECP_C
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED
Enable SECP256K1 curve
Found in: Component config > mbedTLS > CONFIG_MBEDTLS_ECP_C
Enable support for SECP256K1 Elliptic Curve.
Default value:
• Yes (enabled) if (CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN || CON-
FIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY) && CONFIG_MBEDTLS_ECP_C
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED
Enable BP256R1 curve
Found in: Component config > mbedTLS > CONFIG_MBEDTLS_ECP_C
support for DP Elliptic Curve.
Default value:
• Yes (enabled) if (CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN || CON-
FIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY) && CONFIG_MBEDTLS_ECP_C
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED
Enable BP384R1 curve
Found in: Component config > mbedTLS > CONFIG_MBEDTLS_ECP_C
support for DP Elliptic Curve.
Default value:
• Yes (enabled) if (CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN || CON-
FIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY) && CONFIG_MBEDTLS_ECP_C
Espressif Systems 1201
Submit Document Feedback
Release v4.4