Chapter 2. API Reference
CONFIG_MQTT_TASK_STACK_SIZE
MQTT task stack size
Found in: Component config > ESP-MQTT Configurations > CONFIG_MQTT_USE_CUSTOM_CONFIG
MQTT task stack size
Default value:
• 6144 if CONFIG_MQTT_USE_CUSTOM_CONFIG
CONFIG_MQTT_DISABLE_API_LOCKS
Disable API locks
Found in: Component config > ESP-MQTT Configurations > CONFIG_MQTT_USE_CUSTOM_CONFIG
Default config employs API locks to protect internal structures. It is possible to disable these locks if
the user code doesn’t access MQTT API from multiple concurrent tasks
Default value:
• No (disabled) if CONFIG_MQTT_USE_CUSTOM_CONFIG
CONFIG_MQTT_TASK_PRIORITY
MQTT task priority
Found in: Component config > ESP-MQTT Configurations > CONFIG_MQTT_USE_CUSTOM_CONFIG
MQTT task priority. Higher number denotes higher priority.
Default value:
• 5 if CONFIG_MQTT_USE_CUSTOM_CONFIG
CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED
Enable MQTT task core selection
Found in: Component config > ESP-MQTT Configurations
This will enable core selection
Default value:
•“false”
CONFIG_MQTT_TASK_CORE_SELECTION
Core to use ?
Found in: Component config > ESP-MQTT Configurations > CON-
FIG_MQTT_TASK_CORE_SELECTION_ENABLED
Available options:
• Core 0 (MQTT_USE_CORE_0)
• Core 1 (MQTT_USE_CORE_1)
CONFIG_MQTT_CUSTOM_OUTBOX
Enable custom outbox implementation
Found in: Component config > ESP-MQTT Configurations
Set to true if a specific implementation of message outbox is needed (e.g. persistant outbox in NVM or
similar).
Default value:
Espressif Systems 1209
Submit Document Feedback
Release v4.4
To Next Page
Loading...