Espressif ESP32-S2 User Manual

Chapter 2. API Reference
Default value:
• No (disabled) if CONFIG_TINYUSB
CONFIG_TINYUSB_TASK_PRIORITY
TinyUSB task priority
Found in: Component config > TinyUSB Stack > CONFIG_TINYUSB > TinyUSB task configuration
Set the priority of the default TinyUSB main task.
Default value:
• 5 if CONFIG_TINYUSB_NO_DEFAULT_TASK && CONFIG_TINYUSB
CONFIG_TINYUSB_TASK_STACK_SIZE
TinyUSB task stack size (bytes)
Found in: Component config > TinyUSB Stack > CONFIG_TINYUSB > TinyUSB task configuration
Set the stack size of the default TinyUSB main task.
Default value:
• 4096 if CONFIG_TINYUSB_NO_DEFAULT_TASK && CONFIG_TINYUSB
Descriptor configuration Contains:
• CONFIG_TINYUSB_DESC_BCD_DEVICE
• CONFIG_TINYUSB_DESC_CDC_STRING
• CONFIG_TINYUSB_DESC_HID_STRING
• CONFIG_TINYUSB_DESC_MANUFACTURER_STRING
• CONFIG_TINYUSB_DESC_MSC_STRING
• CONFIG_TINYUSB_DESC_CUSTOM_PID
• CONFIG_TINYUSB_DESC_USE_DEFAULT_PID
• CONFIG_TINYUSB_DESC_PRODUCT_STRING
• CONFIG_TINYUSB_DESC_SERIAL_STRING
• CONFIG_TINYUSB_DESC_CUSTOM_VID
• CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID
CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID
VID: Use Espressif’s vendor ID
Found in: Component config > TinyUSB Stack > CONFIG_TINYUSB > Descriptor configuration
Enable this option, USB device will use Espressif’s vendor ID as its VID. This is helpful at product
develop stage.
Default value:
• Yes (enabled) if CONFIG_TINYUSB
CONFIG_TINYUSB_DESC_CUSTOM_VID
VID: Custom vendor ID
Found in: Component config > TinyUSB Stack > CONFIG_TINYUSB > Descriptor configuration
Custom Vendor ID.
Default value:
•“0x1234”if CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID && CONFIG_TINYUSB
Espressif Systems 1227
Submit Document Feedback
Release v4.4

Espressif ESP32-S2 Specifications

General

Brand	Espressif
Model	ESP32-S2
Category	Single board computers
Language	English