2 Setup 19
Clear/Set Patch
Clear Intensity Patch
The intensity patch for INT A and INT B is cleared from the Patch Menu.
Menu>Patch>Patch Set/Clear>[Clear INT Patch]
Press OK to confirm.
Set Intensity Patch 1:1
The intensity patch for INT A and INT B is set 1:1 from the Patch Menu.
Menu>Patch>Patch Set/Clear>[Set INT Patch 1:1?]
Press OK to confirm.
Note:
The Device Intensity channels can be used to patch 24 more conventional lights if no
Devices are being used. See “Patch by Channel” on page 21.
Clear Device Patch
Devices can be unpatched “all” or one by one in the Patch Menu.
Menu>Patch>Patch Set/Clear>[Clear Device]
Select All or 1-24 with wheel, and press OK to confirm.
To Next Page
Loading...
Need help?
General
