ETC SmartFade ML - Special - Fade with Intensity; Special - Invert Parameter

2 Setup 37
Special - Fade With Intensity
When you have assigned your parameters in live or blind, press (MENU) to go from the
Personality Editor to the “Fade with intensity” or “Invert Parameter” configuration.
Step 1: Use wheel 3 to select “Fade With Intensity”.
Step 2: Press (MENU) to activate. Now use the bump buttons to toggle “Fade With
Intensity” mode for each parameter fader in Param 1 and Param 2. The bump
button will light up when the FWI mode is active.
Special - Invert Parameter
When you have assigned your parameters in live or blind, press (MENU) to go from the
Personality Editor to the “Fade with intensity” or “Invert Parameter” configuration.
Step 1: Use wheel 3 to select “Invert Parameter”.
Step 2: Press (MENU) to activate. Now use the bump buttons to toggle “Fade With
Intensity” mode for each parameter fader in Param 1 and Param 2. The bump
button will light up when the FWI mode is active.