22 SmartFade ML v3.0.1 User Manual
Patch Independents
Independent buttons IND 1 and IND 2 provide two outputs separated from all other controls.
They are intended to operate devices such as smoke machines, tab tracks, cue lights, etc.
• SOLO does not affect these outputs.
• The state or result of the 2 independent outputs is not recordable.
The Default Patch
SmartFade ML defaults to the last outputs in DMX universe 1 for the independents.
IND 1 = DMX 511
IND 2 = DMX 512
This is easy to remember and provides immediate control with two outputs. It is also
possible to create a custom patch by assigning any DMX outputs to the independents. This
is done in the Patch. They are indicated in the patch as channels i1 and i2. See “Patch by
Dimmer” on page 20. See “Patch by Channel” on page 21.
Set up Independents
The basic behaviour of the buttons and faders are set up in the Independents menu.
Menu>[Independents]
Button behavior
Menu choice Console Feedback
[Button mode] Wheels 1 & 2
[Master mode] Wheels 1 & 2
Sets if BLACKOUT and MASTER
fader will affect or not.
[Set Level] Wheels 1 & 2
To Next Page
Loading...
Need help?
General
