80 SmartFade ML v3.0.1 User Manual
Edit Palettes
Palettes are stored as references in memories to speed up corrections in a show. For
example, if you have used a COLOR palette Red in several memories and you want this
red to be darker everywhere - just update the Red palette. The change will be reflected in
all memories that have a reference to this palette.
If you had recorded the CMY parameter values for red instead of using palettes, you would
have had to update each memory with this red separately and parameter by parameter.
Edit a Palette
Action Console Feedback
1. Select devices ... Selected device buttons are lit to full (Device
Select mode has to be active).
2. Make changes Parameter functions All changes are reflected live on the output.
3. Activate recording All buttons that can record in this mode will
blink (press CLEAR to exit).
4. Select palette type This button lights up. All 24 select buttons will
blink dimmed. Already recorded ones will
blink at full.
5. Re-record palette ... As soon as a select button is pressed, the pal-
ette is stored to that button and updated in all
memories. The console will automatically
return to Device Select mode.
To Next Page
Loading...
Need help?
General
