26 SmartFade ML v3.0.1 User Manual
Console Setup
Erase Functions
Erasing data is done from the Setup menu.
Menu>Setup>[Erase]
The following kind of data can be erased:
• All show data
•Memories
• Sequences
•Stack
•Palettes
Default Times
Default times can be set for
• Fades in Sequences and Stack. See “Default Fade Times” on page 74.
• Move Dark Time.
• Palette Time.
Crossfade Faders
The direction in which the Crossfade faders advance to the next step in STACK mode is set
in the Setup menu.
Menu>Setup>[Crossfade faders]
There are two choices of behavior
• Upwards only, meaning that you will need to pull the faders back to the bottom before
fading "up" into the next cue
• Both ways, meaning that each time you move the faders from bottom-to-top or top-to-
bottom you will fade into the next cue in the stack.
To Next Page
Loading...
Need help?
General
