Euphonix MC Media Application Controller User Manual

Euphonix Media Application Controller Operation Manual DAW Integration
113
To edit plugin settings:
1. Press the Channel Insert Soft Key.
2. Press the Soft Key corresponding to the plugin to edit (Select 1–4).
The leftmost four Soft Knobs now become the first four plugin parameters.
3. Turn the Soft Knobs to edit the settings.
4. If the plugin has more than four parameters, turn the Insert Parameter Scroll
Soft Knob (top-right of Soft Knobs section) to display the additional page(s).
The four leftmost knobs reflect the current page of parameters.
5. Double-press the Channel Insert Soft Key to cycle through the instantiated
plugins for that channel.
6. Press the Bypass Soft Key (top-right of Soft Keys section) to toggle the plugin
between bypass and insert.
These changes are reflected in the Pro Tools Inserts view for each track.
When first instantiating a plugin on a channel, that plugin’s window pops up in Pro
Tools. Subsequent plugin editing may not automatically open the plugin window. If the
plugin window is not opening when the plugin is being edited, press the Show Plugin
Soft Key in Soft Key bank 2.
Auxes
To assign a channel to an aux send:
1. Press the Assign Soft Key (second row in the main Soft Key section).
The Assign key flashes.
2. Press one of the Aux Send A–E Soft Keys in the second row to select the send
to edit.
3. Turn the ASGN Soft Knob (rightmost bottom Soft Knob) to select where to
send the channel.
The name of the send is displayed in the yellow Channel box just above the em-
ulated HUI display on the MC Touchscreen.
4. Press the ASGN Soft Knob to confirm the selection.
The send appears in Pro Tools.
5. Press the Assign Soft Key in the main Soft Key section to exit aux send assign-
ment mode.

Euphonix MC Media Application Controller Specifications

General

Brand	Euphonix
Model	MC Media Application Controller
Category	Recording Equipment
Language	English