Euphonix MC Media Application Controller User Manual

Euphonix Media Application Controller Operation Manual MC Preference Settings
38
4.3 Setup
Figure 4-3 Preferences-Setup
Touching Euphonix Menu->Preferences->Setup opens the most recently used Setup
Touchscreen.
4.3.1 Devices
NOTE: The Filters buttons and controls are for factory use only. DO NOT modify
these settings unless instructed to do so by a Euphonix representative.
This setting allows the user to swap the mapping of the track wheels (jog rings around
the trackball), enabling the physical left jog wheel to be used as the logical right wheel.
This is useful for left-handed users and to allow two users access to the track wheels
with one person sitting to the left of the MC but operating the right (logical) track
wheel.
To reassign either wheel:
1. Touch Identify Left Wheel or Identify Right Wheel.
The MC displays a dialog requesting movement of the track wheel to remap.
2. Move the desired track wheel and touch OK.
The MC now interprets all commands coming from that track wheel as coming from
the Right or Left Wheel you selected.

Euphonix MC Media Application Controller Specifications

General

Brand	Euphonix
Model	MC Media Application Controller
Category	Recording Equipment
Language	English