Euphonix MC Media Application Controller - Soft Keys Setup

Euphonix Media Application Controller Operation Manual Soft Keys
42
5.2 Soft Keys Setup
Press the main Soft Keys Setup button (bottom-right of the Soft Keys section) to con-
figure the main Soft Keys. The Right/Left Edit section Soft Keys can be changed by
pressing that section’s Setup button. The Touchscreen changes to show the Soft Keys
setup.
The Commands and Labels tabs of the Soft Keys Setup Touchscreen edit the definitions
and labels of the Soft Keys. Press the Soft Key to modify; it begins flashing. The Com-
mands and Labels tabs display the Soft Key’s currently assigned commands and labels,
which can now be modified.
5.2.1 Commands
Four types of commands can be mapped to a Soft Key:
• Key: macro commands made up of computer keyboard (ASCII) characters
(Figure 5-4).
• EuCon: mapped from MC directly into application using EuCon (Figure 5-6).
• Soft Key Bank Switch: enable navigation to MC Soft Key banks (Figure 5-5).
•MC: MC specific commands are Layout Recall, Parameter Collect, Parameter
Punch, Read/Write All.