Euphonix MC Media Application Controller User Manual

Euphonix Media Application Controller Operation Manual Soft Keys
44
Figure 5-3 Setup-Commands Touchscreen
To assign a command, touch the Add button. A popup menu requests a choice between
adding a Key, EuCon, Soft Bank Key Switch, or MC command. Touch to select the
command type and the screen for that command is displayed (see Figures 5-4, 5-5, and
5-6).
The Repeat button (next to the Add button) sets the Soft Key to be repeatable: When
the key is held down, the MC repeats the Soft Key’s command chain. This is typically
used for zoom and nudge buttons. The repeat rate for the command chain is set in the
Preferences-Soft Keys Touchscreen.
To delete a command, touch the command’s slot in the chain and touch the Delete but-
ton. If a command in the middle of the chain is deleted, the remaining commands shift
left to take its place.

Euphonix MC Media Application Controller Specifications

General

Brand	Euphonix
Model	MC Media Application Controller
Category	Recording Equipment
Language	English