Do you have a question about the Euphonix MC Media Application Controller and is the answer not in the manual?
Brand | Euphonix |
---|---|
Model | MC Media Application Controller |
Category | Recording Equipment |
Language | English |
Emphasizes the importance of heeding all warnings provided.
Safety precaution against using the device near water.
Warning against obstructing ventilation openings for proper operation.
Guidance on protecting the power cord from damage.
Explains the different control protocols the MC supports.
Introduces the Studio Monitor Express (SME) monitoring application.
Provides guidance on navigating and using the PDF manual's features.
Covers essential hardware aspects for installation.
Details the physical connections available on the MC's rear panel.
Guides through the process of installing the EuCon software.
Details the firmware update process for System 5-MC.
Covers the configuration steps for the MC client software.
Details IP addressing for MC and System 5-MC network setups.
Guides on assigning and controlling multiple workstations.
Explains how workstation assignments are retained after reboots.
Covers the assignment and management of CM408T modules.
Describes the Main-Tracks touchscreen interface and its information display.
Explains the Main-Flip function for reassigning knobs to faders.
Details the Euphonix Menu icon and its options.
Configures global preferences for MC operation.
Sets preferences for Solo Mode and Solo Switch functions.
Manages various setup configurations for the MC.
Displays version information for the EuCon software.
Explains Soft Key banks and their organization.
Guides on configuring Soft Key commands and labels.
Describes the function of knob cells for track editing.
Details the dynamic assignment and locking of the Assignable Knob.
Explains how knobset changes are notified to the DAW.
Explains the MC's four channel strips and track assignment.
Details the functions of the Strip Control section buttons.
Guides on assigning workstation tracks to channel strips.
Controls the overall Control Room volume and speaker selection.
Manages monitor outputs and audio sources.
Functions for clearing solo/mute states and applying knobset selections.
Controls the talkback microphone and its routing.
Configures sources for Control Room, Monitor A, and Monitor B.
Creates and manages input sources for the SME mixer.
Sets physical output channels for SME monitor sections.
Routes application outputs to audio hardware or SME inputs.
Routes hardware inputs to application or SME mixer inputs.
Calibrates and mutes output levels for monitoring sections.
Sets sample rate, levels, and enables hardware ports.
Configures sources for Control Room, Monitor A, and Monitor B.
Creates and manages input sources for the SME mixer.
Routes SME inputs and outputs using the Core Audio driver.
Calibrates and mutes output levels for monitoring sections.
Displays selected Core Audio driver, levels, and CPU usage.
Manages custom configurations for applications.
Details integration with Steinberg Nuendo.
Explains integration with Merging Technologies Pyramix.
Explains HUI protocol and its use with DAWs.
Details integration using the Mackie Control Universal protocol.
Describes controlling the DAD AX24 preamp via EuCon.
Provides information on accessing Euphonix support resources.
Offers solutions for common problems and contact information.
Lists common problems and their resolutions.