Euphonix Media Application Controller Operation Manual DAW Integration
96
Press the Control Room Setup button on the MC to open the Control Room Setup
Touchscreen. There are three tabs:
Source: This selects what the Control Room section monitors. The Mix bus, the default
bus in Nuendo’s VST Devices Output tab (denoted by an orange speaker icon next to
its name) is always available. If Studio or External Input busses have been created, they
also appear.
NOTE: Due to Nuendo's internal mixing structure, only one external input can be mon-
itored at a time. Thus, no matter how many of the six External Input busses are
used in the VST Connections->Studio tab, there will be only one Ext. selection
on the MC's Touchscreen. To switch between External Inputs, you must use
Nuendo's Control Room Overview (Devices menu) and click on the available
External Input crosspoint boxes.
Figure 11-5 Output tab in Control Room Setup Touchscreen
Output: This allows soloing one or more speakers. Touch the speakers in the Speaker
list to solo. They change to cyan to show that they are soloed. The Left-Right option is
a shortcut for a stereo feed: it automatically solos the Left and Right speakers. Touch
the Cancel button at the top to turn off all solo assignments.
NOTE: The Folddown and Dim Level controls shown on this tab are not enabled for
use with Nuendo’s Control Room Mixer at this time.
To Next Page
Loading...
Need help?
General
