Euphonix MC Media Application Controller User Manual

Euphonix Media Application Controller Operation Manual Working with Channels
66
7.3 Assigning Tracks to Strips
The MC has four channel strips. The System 5-MC can have a virtually unlimited num-
ber of CM408Ts. The MC and CM408T strips can be scrolled independently. The
CM408T strips can have a Main and a Swap track assigned; the CM408T strip’s Swap
key switches between Main and Swap layers.
When the MC connects to a workstation with EuCon DAW software (or Mackie Con-
trol Universal/HUI), it automatically populates the channel strips (System 5-MC auto-
matically populates the CM408Ts) with DAW tracks, putting track 1 on channel strip
1 and continuing sequentially. Deleting/adding tracks or changing track order automat-
ically updates the MC/CM408T strips.
7.3.1 Strips and Tracks
Any track can be assigned directly to a strip, similar to System 5’s mapping of channels
to strips. Direct Assigned tracks do not move when the Nudge, Bank, and Home keys
are pressed.
Use the Assign Touchscreen to direct assign tracks to channel strips (the MC’s four
strips, or CM408T module channel strips for System-5 MC).
Figure 7-5 Assign Touchscreen

Euphonix MC Media Application Controller Specifications

General

Brand	Euphonix
Model	MC Media Application Controller
Category	Recording Equipment
Language	English